|
 |
Windows: Setup / Hangs
- Windows
98 Setup May Hang on Toshiba Tecra or
Protege
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q189113
(W98 Jul. 25, 2001)
- Setup
Hangs in Plug and Play Detection Upgrading Over Client32
When
you are upgrading from Microsoft Windows 95 to Windows 98, Setup may
stop responding (hang) during the Plug and Play hardware detection
process. When this occurs, you may receive a "Fatal Error 0E"
error message, and Setup cannot continue.
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q189185
(W98 Mar. 1, 2002)
- Computer
Hangs When You Restart for the First Time During Setup
When
you install Windows 98, Windows 98 Setup may stop responding
(hang) when your computer restarts for the first
time.
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q193156
(W98 Apr. 17, 2001)
- Windows
98 Setup Hangs During Plug and Play Hardware Detection
When
you attempt to install Windows 98, Setup may stop responding (hang)
during the Plug and Play hardware detection process. When you
restart your computer, Setup may hang at the same
point.
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q194721
(W98/ME Jul. 25, 2001)
- How
to Troubleshoot Computer Hangs During Hardware Detection
When
you attempt to install Windows 98, Setup may stop responding (hang)
during the hardware detection process. During this phase, Windows 98
Setup determines what hardware components are installed in your
computer.
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q262381
(W98/se/ME Jul. 25, 2001)
- Setup
Stops Responding at Scanning System Registry
When you
attempt to install Microsoft Windows 98 on a new or unformatted hard
disk, you may receive the following command-line message:
Please
wait while Setup initializes. Scanning system registry... Windows
Setup may then stop responding (hang) and you may be unable to
continue the Windows
installation.
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q300026
(W98/se Jan. 29, 2002)
- Computer
May Reboot Continuously with More Than 1.5 GB of RAM
when
you try to install Windows Me or Windows 98 with more than 1.5 GB of RAM
installed, Setup may stop responding (hang) or reboot
continuously.
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q304943
(W98/se/ME Sept. 14, 2001) |
Windows: Setup.txt files
Windows: Setup / Path
Windows: Setup / Switches
Windows: Setup / General, Errors, Problems
- Error
Message "Invalid System Disk" After Setup Reboots
Invalid
system disk Replace the disk. This version of Windows does not run on
DOS 7.0 or
earlier.
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q128730
(W95/98 Dec. 17, 2000)
- Windows
95 Setup: Description and Troubleshooting Steps
This article
describes troubleshooting steps that may help you solve problems
installing Windows
95.
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q129260
(W95 Mar. 31, 2000)
- "Dirty"
and "Deadly" TRSs Detected by Windows
95
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q139052
(W95 Dec. 17, 2000)
- Err
Msg: Could Not Decode This Setup (.cab) File...
Setup has
detected the following decoding error: "Could not decode this setup
(.CAB) file." Setup will attempt to recover from this situation,
click OK to continue.
Setup (.cab) file error Setup has
detected the following decoding error: Setup has detected a corrupt
setup (.cab) file. Setup will attempt to recover from this
situation.
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q140901
(W95/98/se Jul. 24, 2001)
- Setup
Defaults to Windows.000 Folder
When you install Windows
Setup may default to installing Windows in the Windows.000
folder.
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q142545
(W95/98/se/ME Dec. 17, 2000)
- Install
Command Missing from inf File Context Menu
When you
right-click a setup information (.inf) file, the Install command may be
missing from the menu that
appears.
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q187664
(Aug. 9, 2001)
- "Call
to Undefined Dynalink" Error Message During Windows 98
Setup
When you run Windows 95/98 Setup, you may
receive the following error message:
Call to Undefined
Dynalink.
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q188970
(W95/98/se Dec. 18, 2000)
- Error
Message: Setup Was Unable to Install All the
Components
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q189679
(i. e. 4, 5. W95/98/se/NT Jun. 11, 2002)
- Err
Msg: Setup Cannot Run from MS-DOS Mode with a Private
Configuration...
Setup cannot run from MS-DOS mode
with a private configuration. Either run Setup from Windows or
shut down Windows and run Setup from
MS-DOS.
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q208909
(W98/se Jan. 18, 2001)
- When
you attempt to upgrade to Windows 98 Second Edition, you may receive the
following error message:
Windows 98 Setup: The
required Windows 98 files could not be found on your computer. You must
install a complete version of Windows 98 before proceeding. Setup will
now
exit.
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q231928
(W98se Dec. 15, 2000)
- Err
Msg: Setup encountered a problem while checking the integrity of your
registry
When you attempt to install Windows
98se.
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q232758
(W98se Mar. 20, 2000)
- PRB:
Setup Cannot Find Catalog Files That Are Manually Copied to the
System
If the catalog file has not been registered
before the driver package is installed when you design an executable in
Windows 98 and Windows 98 Second Edition that installs a signed driver
package, the Setupx.dll file may prompt you for a missing catalog (.cat)
file.
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q232893
(W98/se Jan. 7, 2000)
- Safe
Recovery Not Offered After Failed Installation.
When you
restart Setup after a failed installation, you are not prompted
with a choice for "Safe
Recovery."
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q258560
(W98/se/ME Oct. 22, 2000)
- Entering
OEM Product Key Information When Running Msbatch.inf
This
article discusses how to specify Product Key information when you run
Msbatch.inf to automate Windows 95 and Windows 98
Setup.
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q263281
(W95/98/se Jun. 29, 2001)
- Error
Message: Windows Setup Requires Largest Executable Program Size to Be at
Least 4,442,368 Bytes
Windows Setup requires the largest
executable program size to be at least x,xxx,xxx bytes. The number that
is reported may be 4,442,368 or 442,368
bytes.
http://support.microsoft.com/default.aspx?scid=KB;EN-US;q289727
(W/98/se/ME Apr. 17, 2001) |
Windows: Setup / Links, FAQs
- FAQ
Windows 95 Setup
Setup How-To's, Errors, Problems,
Options.
http://members.aol.com/KnowsWin95/setup95.htm
- SetUp or
Install
Help to setup or install Windows
95.
http://nt.softsolutions.com/homedir/win95vl/install/
- SetUp
Installing
Windows 95 with INF Files.
http://www.onecomputerguy.com
- Inf-Fo Tool
The
special Setup Program and INF Generator for Windows 95/98/NT.
Look under Software Tools.
http://Inner-Smile.com
- INF
Installer
The Infinst tool can be used to integrate .INF (and
related) files from the various tools directories contained within the
Admin directory on the Microsoft(r) Windows(r) 95
CD.
http://www.eu.microsoft.com/windows/software/servpak1/infinst.htm |
|
|
|
